Facebook | 
Twitter
AHLMANN AZ 75 AND AZ 95, Completely new swing loaders
The new swing loader Ahlmann Nederland is launching on the market, the AZ 95 model, is a worthy successor to the highly popular AZ 85t. This brand new addition to Ahlmann’s programme is a fast, powerful machine with a contemporary design. Ahlmann has also added the AZ 75, which is slightly lighter in terms of engine power and equipment, to its range. Its design continues along the lines seen earlier in the AX and the AF front loaders introduced at Bauma 2010.
The newcomer’s most striking feature is its unusual monoboom. It stands out not only because of its shape, but also because of the 'booster' effect generated by locating the parallel cylinder in line with the lifting cylinder. This booster technology has helped raise the lifting capacity of the Ahlmann AZ 95 swing loader by 50%. Its breakout force is approx. 20% higher than its predecessor AZ 85t and its thrust force nearly 10% higher. The booster cylinder assists with lifting, among other things, when required. This booster support has raised the lifting capacity of the AZ 95 to 7,500 daN, which is almost twice that of the AZ 85t. The payload with pallet forks – with the boom swivelled to 90° – is almost 3 ton. The lifting cylinder and both tilting cylinders are fully integrated in the slender monoboom. The cylinders and the hydraulic hoses and lines are tucked away and well protected within the structure of the boom, which consists partly of cast work. Furthermore, measuring from the bucket pivot pin, the new monoboom has a 12 cm greater dump height, which makes loading dumper trucks and feed mixing vehicles even easier.
The new AZ 75 and AZ 95 have been taken in hand on practically all fronts and are, therefore, completely new. From swivel frame to bonnet and from cabin to chassis. In the 6.2-ton AZ 75, Ahlmann has opted for a 48-kW (65 hp) Cummins B3.3 diesel engine. The 6.8-ton AZ 95 has been equipped with a powerful 55-kW (75 hp) Cummins B3.3T turbo diesel engine. The new engines are pleasantly quiet during operation.
As a result of the slender boom, visibility has been improved and the working area between the tyres has been increased. Even when wider tyres are mounted on the loader, the machine is nice and narrow because they fit largely under the vehicle rather than projecting outside it.
The new cabins are much more comfortable for the driver. It is easy to get in and out, everything is in the right place in the cabin, the steering wheel and seat are simple to adjust and the high, wide windscreen and roof window enable the driver to see well. The driver always has a good view of the bucket and the traffic in the vicinity. Both doors are equipped with a sliding window which can also be left slightly open.
The development of the new swing loader by manufacturer Mecalac-Ahlmann, under the project name ‘Pegasus’, took around three years. During this development, the Ahlmann technicians received a great deal of input based on practical experience from both dealers and end users.
Demonstration field with new celeriac hybrids and cauliflower, courgette and carrot varieties.
NEW AGROTRON TTV 400-SERIES with CONTINOUSLY VARIABLE TRANSMISSION
With the new 4-cylinder Agrotron TTV410/420/430 (121, 130 en 142 HP), Deutz-Fahris enlarging their offer in the range of tractors equipped with Variable transmission. The AgrotronTTV- Rangeconsists now of 6 different models with engines up to 224HP.
The AgrotronS-cabine offers in the TTV410/420/430, a glass surface from over 6,5m2, guarantying a maximum visibility. The optional "I-Monitor"terminal isISOBUS compatible.
Joskin Cargo Track : Self-Propelled multifuntionel tool carrrier with four traction axles
Joskin Zuigarm 10” met telescopisch verlengstuk : 10” articulated pumping arm for pumping depths up to 4m for an average filling capacity of 10,000 l/ minute
Joskin DL pomp Jurop : Maintenance and wear free vacuüm pump with high and long pumping abilities from 14 to 20,000 l / min
Joskin Isobus aansturing voor tanken : Isobus control for tankers equiped with a flow meter
Joskin Euroliner X-Treme : Triple-axle transport tanker with an X-Trem chassis, total width 2,55m with tyres maximum 620 mm wide
Krone BigX 700, 850 et 1100 : A new series of forrage harvesters with a new design, more spacious cabin and powerful engines from MAN
Quicke LCS bediening : Pressureless rerecuperation of oil, combined with elements supporting on the Load Sensing principles, as well as a more ergonomic version of the electro-hydraulic commands make these loaders very swift and easy to use
Strautmann CFS : The Continuous Flow System makes sure there is an equal supply of forrage towards the rotor at all times and diminishesthe distance between rotor and body. Between the Pick-Up and the cutting rotor there is a propelled roller mounted with spirals, that acceleratesthe material towards the rotor and distributes the grass sideways. In combination with the higher built in rotor this results in lower power requirements and a greatly improved capacity
Monosem NG+4 CRT 12 rijen maïs : 12 row maïze seeder, mounted with the NG+4 elements, floating suspension of the chassis, supported by four wheels, serving as drive wheels for the seeder. Transport width under 3m. Combination with a front hopper for fertiliser seeding
Sulky Xeos : Pneumatic seeder for rape seed, up until the heaviest and most irregular seeds, with a capacity of 1500 or 1800 litres, available in 3m, 3,5 and 4m working width
Sulky Polyvrac XT : Multifunctionalchalkand fertiliser spreader. Spreading widt for fertiliser up to 44m, chicken manure, compost and moist chalk up to 12m and dry chalk through augersreaching 9m wide. All this is possible on the same machine
Hyundai i40 :
With its outstanding exterior and interior design, numerous high-tech features and high quality, i40 will be a flagship model for Hyundai in Europe. Like the ix35, i40 will attract new customers to Hyundai showrooms and drive a significant expansion of sales to the fleet sector. The i40 was designed and engineered in Europe.This vehicle is also supported by Hyundai’s industry-best Five Year Triple Care assurance. This package is a combination of a 5 unlimited warranty, 5 years of roadside assistance and 5 years of vehicle health checks.
Hyundai ix 35 :
Since a year the ix35 from Hyundai gives a new definition to the SUV: Sporty, sure, looking for new challenges, and very sophisticated. The ix35, seems to move on without even drive a meter. This elegant car was fully designed in the European designcenter from Hyundai. He is easy to drive in the traffic, is not afraid of speed ramps and disaster roads, but also in the countryside you will be surprised by his performances and driving pleasure he procures. Moreover, as a driver, you will be sitting in a higher position looking all over the road. This vehicle is also supported by Hyundai’s industry-best Five Year Triple Care assurance. This package is a combination of a 5 unlimited warranty, 5 years of roadside assistance and 5 years of vehicle health checks.
High Speed Drilling for the Smaller User :
LEMKEN launches new mounted drill combination with pneumatic seed drill and compact disc harrow
Plastic fibre weed brushes which are fitting in the same trimmer head as the cutters without making use of any tools.